Advertisement
AUX C - Auxiliary Output (a mult of the Line Output) XLR pin 2 hot
AUX D - Auxiliary Input XLR pin 2 hot (engaged with INPUT toggle in the middle position)
FRONT PANEL
Input Select Toggle
Up - Line Input
Middle - Aux Input (AUX B on CH.1, AUX D on CH. 2)
Down - Instrument Input
Instrument Input
¼" Tip/Sleeve (engaged with INPUT toggle in the down position).
In order to accommodate a wide range of instruments from synths to passive basses, the
instrument input amp provides an additional 12.75dB of gain, allowing low level instruments to
still 'drive' the circuitry. This puts the 'DRY' signal at a higher gain vs 'WET' than when using the
balanced line inputs, some balancing of MIX and OUTPUT may be necessary to achieve the
desired mix.
High Frequency EQ Switch
Fixed +2 dB high shelf boost at 12KHz.
Low Frequency EQ Switch
Fixed +2 dB low shelf boost at 100Hz.
High Pass Filter Switch
Fixed 2 pole high pass filter with a resonant peak at 50Hz.
INPUT Control
Sets the input gain, and determines how hard the channel is driven.
On the stepped version, the range of this control -17.5dB to +21.5dB, unity is '3'.
MIX Control
Controls the balance of processed to unprocessed signal.
OUTPUT Control
All rights reserved. All features and specifications subject to change without notice
Advertisement
