Advertisement
SAFETY AND INSTALLATION
Installation
1. Before attaching the DC plug of an adaptor to equipment, please unplug the adaptor
from the AC power and verify the unit is within the voltage and current rating on the
equipment.
2. Keep the linkage between the adaptor and its power cord tightly as well as connecting
the DC plug to equipment properly.
3. Protect the power cord from being trodden on or being squashed.
4. Use only an approved power cord, do not defeat the safety grounding pin which must
be connected to earth at all times (do not use a ground lift).
5. Keep good ventilation for the unit in use to prevent it from overheating. Do not install
near any heat source or device that produces heat.
6. An approved power cord should greater or equal to SVT, 3G×18AWG or H03VV-F,
3G×0.75mm2.
7. If the final equipment is not used for long period of time, disconnect the equipment
from power supply to avoid being damaged by voltage peaks or lightning strike.
Warning / Caution !!
1. Risk of electrical shock and energy hazard. All failure should be examined by a qualified
technician. Please do not remove the case of the adaptor by yourself!
2. Risk of fire or electrical shock. The openings should be protected from foreign objects
or dripping liquids.
3. Using wrong DC plug or forcing a DC plug into an electronic device may damage the
device or cause to malfunction.
4. Adaptors should be placed on a reliable surface. A drop or fall could cause damage.
5. Do not use or install in places with high moisture or near the water.
6. Do not use or install in places with high ambient temperature or near fire source.
7. Disconnect the unit from the AC power before cleaning. Do not use any liquid or
aerosol.
Please contact your local qualified recyclers when you want to dispose this product.
All rights reserved. All features and specifications subject to change without notice
Advertisement
