MAG BR500 Series User Manual

Intelli barrier, intelligent vehicle barrier gate

Advertisement

Quick Links

User Manual
BR500 intelli BARRIER
Intelligent Vehicle Barrier Gate

1) General Description

MAG BR500 series intelli barriers utilize innovative technology design and manufactured with precision
machinery to guarantee satisfaction in quality and reliability for years to come.
MAG intelligent barrier has been lab tested for more than 2.5 millions opening / closing and still without
any degrade in performance – superb mechanical life time for heavy duty application. It composed
primarily of an electronic panel that controls the mechanical unit to lift or release the barrier arm.

2) Production Type

Model No.
BR510
BR530
BR560
BR530A90
BR560AFE

3) Features

Intelligent.
i.
accuracy. Combination of unique lever design and smart motor control allow swift arm
movement that reduces bouncing at end position.
Optimal speed.
ii.
This allows smoother and more efficient traffic flow.
Heavy Duty.
iii.
Compressed counter balance spring avoid possibility of spring over-stressed and break due to
high volume continuous open/lose cycle.
Safe.
iv.
Arm will auto-reverse when hitting an obstacle during closing. BR510's arm will auto-fall
out if hit by vehicle to avoid damaging vehicle as well as the arm. Additional photo beam and
traffic light (red & green) can be added to further enhanced safety. Built-in MSB to protect
against any electric hazard.
Durable.
v.
Secure.
vi.
arm. All internal parts inside housing is protected by cam lock to avoid tampering.
User Friendly.
vii.
lifted or closed by hand after clutch is released. More intuitive control – 3 separate input for arm
up, stop and down.
Easy maintenance.
viii.
keep the unit looking clean and new for years
© 2008 UM_BR500 V1
Feature
Open/close
No limit switch – smart processor auto- detects open and close position for higher
Able to fully lift up a 3 meter arm in between 1 to 6 sec depends on the models.
AC based motor is stronger and maintenance free (no need to change carbon).
Housing full weld for rigid support. Thickness of metal.
Arm is self-locked in any position to avoid unauthorized person to manually open/close
Clutch can be conveniently released without opening casing. Arm can be easily
Damaged barrier arm can be replaced easily. Epoxy powder paint will
Max straight
speed
arm
1 sec
3 meter
3 sec
4 meter
6 sec
6 meter
3 sec
4 meter
6 sec
4.5 meter
*M = Meter , sec = second
MAG
Date: 1 April 2011, Revision: V1
Arm swing
out
Yes
Yes
No
No
No
®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BR500 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for MAG BR500 Series

  • Page 1 MAG intelligent barrier has been lab tested for more than 2.5 millions opening / closing and still without any degrade in performance – superb mechanical life time for heavy duty application. It composed primarily of an electronic panel that controls the mechanical unit to lift or release the barrier arm.
  • Page 2 4) Technical specification Description Parameter Mechanical temperature -40° to 75 C Electrical temperature -10° to 75 C Power supply input 220V ± 10% AC, 50/60Hz Power consumption 80 watt Relative humidity < 90 % Arm speed 1 , 3 , 6 second Internal lubrication Grease Max starting torque...
  • Page 3 6) Base Installation Mount the barrier base on the ground with screws. Refer to diagram below : Mounting footprint on ground a) Do marking on the ground base on plug bolt distance (refer diagram above) b) Screw U-Channel Bracket on the ground (refer diagram above) ©...
  • Page 4 7) Arm Installation Mount the arm at the arm tray by screw. Refer to diagram below: 8) How to manual release arm by releasing clutch? Arm can be move manually after unlocking the clutch. This is useful during power failure where user can manually lift the arm allowing traffic to pass through.
  • Page 5 b) Calibrating counter-weight springs tension Tension of counter weight spring needs to be calibrated according to arm length and weight to achieve minimum burden on the motor. This will ensure maximum life time o the motor. Step 1 : Turn the key clockwise to unlock the clutch. Step 2 : Move arm up to 45°...
  • Page 6 10) Adjust arm angle Sometimes the arm might be not perfect horizontal due to improper adjustment usage wear and tear or installation at sloped ground. Perfect horizontal line Perfect horizontal line Arm operating angle can be changed by adjusting the drive crank Arm not at horizontal position Step 1 : Loosen the screw that hold the drive crane in place Step 2 :...
  • Page 7 12) Control Panel © 2008 UM_BR500 V1...
  • Page 8 13) Trouble Shooting Guide a) What if the arm fails to move? Please check and ensure the clutch is lock. If your arm length is shorter than the standard arm, you need to adjust the balance spring. iii. Please check the motor sensor connector whether it has insert properly in the circuit board. The sensor is damage.

This manual is also suitable for:

Br530Br510Br560afeBr560Br530a90

Table of Contents