Specifications - Sony HT-C800DP Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
Amplifier section
Rated Power Output at Stereo Mode
Reference Power Output
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)
Outputs (Analog)
CD/DVD system
Laser
Signal format system
Frequency response (at 2 CH STEREO mode)
Signal-to-noise ratio
Harmonic distortion
GB
78
With 6 ohm loads, both channels driven, from 120 – 20,000 Hz; rated
60 watts per channel minimum RMS power, with no more than 0.7 %
total harmonic distortion from 250 milliwatts to rated output (USA
model only).
60 W + 60 W (6 ohms, at 1 kHz, THD 0.7 %)
Front: 100 W/ch (6 ohms at 1 kHz, THD 10 %)
Center*: 100 W (6 ohms at 1 kHz, THD 10 %)
Surround*: 100 W/ch (6 ohms at 1 kHz, THD 10 %)
Sub woofer*: 100 W (6 ohms at 100 Hz, THD 10 %)
ANALOG IN:
Sensitivity: 500 mV
Impedance: 50 kilohms
PHONES:
Accepts low- and high-impedance headphones
Semiconductor laser
(DVD: = 650 nm)
(CD: = 780 nm)
Emission duration: continuous
NTSC/PAL or NTSC
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
More than 80 dB
Less than 0.03 %