Pickup Roller; Installing Simm - Samsung ML-5000A Service Manual

3-18 Pickup Roller

1. Before you remove the pickup roller, you should
remove:
-All covers (see pages 3-1, 3-4)
-All boards (see pages 3-3, 3-5, 3-6, 3-8)
-Upper frame (see page 3-9)
2. Remove one screw, pull the pick-up bushing
slightly toward you, then rotate it clock-wise.

3-19 Installing SIMM

1. Before you install SIMM, make sure that printer
power is off, all cables are unpluged. The toner
cartridge is also to be removed.
2. Turn the printer upside down, and remove all
screws securing the shield cover, then remove
the shield cover.
Samsung Electronics
3. Remove the E-ring at the right end of the roller.
4. Remove a pin passing through a shaft to take out
the pick-up roller, then push the roller shaft to
the right. Lift the left side of the roller, then take
it out.
Disassembly and Reassembly
3-11