Advertisement
Acoustic Design™ Series
Quick Start Guide
AD-S6
Install the X-Mount™ Bracket
WARIRNG: Install the system in accordance with local building codes and
regulations. Use a licensed contractor or professional engineer. QSC is not
responsible for damages that may result from negligent installation of any
bracket or loudspeaker.
Refer to
Figure 1
Mount to a surface that can support the weight of the loudspeaker.
Wdjust the Wngle of the Bracket
Refer to
Figure 2
ROTEG: You can adjust the bracket angle before or after mounting the
loudspeaker.
5 mm
PAN
— Figure 2 —
Mount the Loudspeaker on the X-Mount™ Bracket
Refer to
Figure 3
TD-001587-01-A
*TD-001587-01*
-30º
+15º
TILT
YAW
Model
Pan
AD-S6
±75º
1
— Figure 1 —
Tilt
Yaw
+15º, -30º
N/A
— Table 1 —
Safety Ring
1
Security Tab
2
— Figure 3 —
TD-001587-01-A
Advertisement
Table of Contents
Related Manuals for QSC Acoustic Design Series
Summary of Contents for QSC Acoustic Design Series
- Page 1 Install the X-Mount™ Bracket WARIRNG: Install the system in accordance with local building codes and regulations. Use a licensed contractor or professional engineer. QSC is not responsible for damages that may result from negligent installation of any bracket or loudspeaker.
- Page 2 (только для США) (800) 772-2834) для получения копии по почте. © 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. X-Mount is a trademark of QSC, LLC. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the Acoustic Design Series and is the answer not in the manual?
Questions and answers