Table of Contents
Advertisement
8 | INSTALLING USB DRIVERS | GEOKON
APPENDIX B.
INSTALLING USB DRIVERS
B.1 WINDOWS 10
The
Model 8020-38 Addressable Bus Converter uses the USB drivers
GEOKON
that are native to Windows 10, so no driver installation is needed. Simply
connect the USB cable from the Converter to the PC.
B.2 WINDOWS 7, 8, AND 8.1
The Addressable Bus Converter requires custom USB drivers for use with
Legacy Windows systems. To install these drivers, do the following:
1.
Download the driver package from the
package onto your PC.
2.
Plug one end of the USB cable into the PC's USB port.
3.
Plug the other end of the USB cable into the Addressable Bus Converter's
USB port.
4.
Open the Windows Device Manager, located in the Windows Control Panel.
5.
Expand the 'Other devices' listing.
6.
Right-click 'USB-485 Converter' and select 'Update Driver Software'.
FIGURE 8: Select "Update Driver Software"
7.
In the window that displays, select 'Browse my computer for driver
software'.
website and unzip the
GEOKON
Advertisement
Table of Contents
