MasterSounds Radius TWO VALVE Operation Manual page 3

1: Important safety instructions - Read first
READ THE INSTRUCTIONS - Read and retain these instructions for future
reference. Adhere to all warnings printed here and on the console and
its power unit.
COVERS - Do not remove the power unit cover. Operate the console
with its cover correctly fitted. Refer servicing work to authorised
personnel only.
MAINS POWER - Connect the console power unit to a mains power supply
only of the type described in this user guide and marked on the unit.
The power source must provide a good ground connection. Do not remove
or tamper with the ground connection in the power cord. Use the power
cord with a sealed mains plug appropriate for your local mains supply
as provided with the console. Route the power cord so that it is not
likely to be walked on, stretched or pinched by items placed upon or
against it.
INSTALLATION - Install the console and its power unit in accordance
with the instructions printed in this user guide. Do not connect
the output of power amplifiers directly to the console. Use audio
connectors and plugs only for their intended purpose.
VENTILATION - Ensure adequate ventilation around the console and its
power unit. Do not obstruct the ventilation slots or position the unit
where the air flow required for ventilation is impeded.
MOISTURE - To reduce the risk of fire or electric shock do not expose
the equipment to rain or moisture or use it in damp or wet conditions.
Do not place containers of liquids on it, which might spill into any
openings.
ENVIRONMENT - Locate the units away from direct sunlight and any
equipment which produces heat, such as power supplies, amplifiers and
heaters. Protect from excessive dirt, dust, heat and vibration when
operating and storing. Avoid tobacco ash, drinks spillage and smoke,
especially that associated with smoke machines. Do not mount the power
supply on any surface subject to resonance or vibration.
HANDLING - To prevent damage to the controls and cosmetics avoid
placing heavy objects on the console surfaces, scratching the surface
with sharp objects, or rough handling and vibration. Protect the
controls from damage during transit. Use adequate packing if you need
to ship the unit.
Radius TWO VALVE
Operation Manual Safety Instructions 3