Internal Wiring Connections For Ports; Com. Port; Tool Port - NAiS GT10 Technical Manual

GT10
1.3

Internal Wiring Connections for Ports

1.3.1

COM. Port

1.3.2

TOOL Port

2
4
1
5
3
SD
RD
RS
CS
GND
Pin No. Contents
1 SG
SD
2
3 RD
4 N.C.
5 (+5 V)

1.3 Internal Wiring Connections for Ports

When connecting the unit to the FP series, there is
no need to wire both the RS and CS.
Wiring and cables should be laid out in such a way
that cables are not affected by external noise. Also,
shielded wiring should be used for cables.
The +5 V of Pin 5 is reserved for the FP
Programmer II. It should not be used for
any other application.
Specifications
9