NETGEAR PowerLine XWNB5602 Installation Manual page 6

Adding a video camera
1. Verify that the Power and Powerline
LEDs on both Powerline devices are lit
solid green.
2. Press the Security button on the WiFi
Access Point for two seconds.
◦ The Power and Wireless LEDs begin
blinking after you release the button.
3. Press the WPS button on your camera for
two seconds within two minutes.
◦ The LED on your camera will begin
blinking blue.
◦ You must press both the security
button on the access point and the
WPS button on the camera within
two minutes.
4. A connection is formed.
◦ The wireless LED on the WiFi
adapter will become solid blue
◦ The LED on the camera will begin
blinking green
◦ Within five minutes the camera
establishes an internet connection
and the LED will become solid green
https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Netgear_PowerLine_Range_Extender/Netgear_PowerLine_R
Updated: Mon, 11 Jun 2018 19:18:45 GMT
6