NETGEAR PowerLine XWNB5602 Installation Manual page 4

Set up
1. Plug the PassThru Adapter into an AC
outlet near the home's Ethernet router.
◦ Do not plug the PassThru Adapter
into a power strip or surge protector.
◦ Do not plug the PassThru Adapter
into a switch-controlled outlet.
2. Connect an Ethernet cable between the
home's Ethernet router and the PassThru
Adapter.
◦ After a few minutes, the Network
LED on the PassThru Adapter will
become green.
3. Plug the WiFi Access Point into an AC
outlet near the installation location for the
camera.
◦ Do not plug the WiFi Access Point
into a power strip or surge protector.
◦ Do not plug the WiFi Access Point
into a switch-controlled outlet.
https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Netgear_PowerLine_Range_Extender/Netgear_PowerLine_R
Updated: Mon, 11 Jun 2018 19:18:45 GMT
4