Thank you for purchasing the MANHATTAN SATA Drive Rack, Model 474344. This user manual tells ® you what need to have and do in order to easily install and enjoy the benefits of this product. Package coNteNts • SATA Drive Rack, Model 474344 •...
Page 3
Parts Front Panel 1 - Power LED 2 - Activity LED 3 - Latches for front-panel door Pull on the latch to unload the hard drive. Rear Panel 1 - LED indicator for fan and HDD HDD 1 reading/writing (4-pin) HDD 1 2 - SATA power connections (15-pin) HDD ...
iNstaLLatioN 1. Remove the covers from two available adjacent drive bays. 2. Insert the drive rack; align the screw holes. 3. Secure the rack with the screws (below left). 4. Connect the SATA power cable to the back of the HDD (15P) and the PC power cable (4P);...
iNsertiNg the hard drive 1. Pull the latch to open the front door. 2. Insert the hard drive in the drive rack, label (printed) side up. CAUTION: The front panel door will not close firmly if the hard drive is inserted backwards.
reMoviNg the hard drive 1. Open the door of the drive rack. CAUTION: Do not eject the hard drive while it is running, as damage to the drive or data loss could result. 2. Remove the hard drive from the drive rack, being careful that the bottom of the hard drive does not touch the metal housing inside the SATA drive rack.
sPecificatioNs General • Supports data transfer speeds up to 3 Gbps • Drive rack connector tested for up to 10,000 insertion/ejection cycles • 2 40 x 40 mm cooling fans • LED power and activity indicators (each drive) • 194 x 146 x 85 mm (7 .6 x 5.75 x 3.4 in.); 1.05 kg (37 oz.) Internal Connections •...
Need help?
Do you have a question about the 474344 and is the answer not in the manual?
Questions and answers