Table of Contents
Advertisement
Demagnetising the tape heads
Demagnetise the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetising cassette. For
details, refer to the instructions of the demagnetising
cassette.
GB
22
Specifications
Main unit
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from 120 -
10,000 Hz; rated 35 watts per channel minimum RMS
power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
North American model:
Continuous RMS power output (reference):
European model:
DIN power output (rated): 30 + 30 W
Continuous RMS power output (reference):
Music power output (reference):
Other models:
The following measured at AC 230 V or AC 120 V, 50/
60 Hz
DIN power output (rated): 30 + 30 W
Continuous RMS power output (reference):
Inputs
MD IN (phono jacks):
Outputs
PHONES (stereo minijack):
SPEAKERS:
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
(6 ohms at 1 kHz, DIN)
30 + 30 W
(6 ohms at 1 kHz, 10%
THD)
60 + 60 W
(6 ohms at 1 kHz, DIN)
30 + 30 W
(6 ohms at 1 kHz, 10%
THD)
Sensitivity 500 mV,
impedance 47 kilohms
Accepts headphones with
an impedance of 8 ohms or
more
Accepts impedance of 6 to
16 ohms.
Advertisement
Table of Contents
