Introduction; Machine Identification - R2 MT Series Instruction And Maintenance Manual

Introduction

We would start by thanking you for having chosen our product and hope that you will be happy with
your choise.
In order that your MILL GRADER Mod. MT – MTL – MThi - MTLhi can offer the maximum
efficiency for many years, we ask you to pay attention to the instructions for use and maintenance
which you will find in this manual. Observance of these regulations will prevent breakdowns and
accidents for which our company will not accept responsability.
This use and maintenance manual is to be considered an integral part of the machine and therefore
it must always accompany the machine when it is sold, even in the event of its sale to third parties.
If you keep this manual in a safe place and in good condition, you - and whoever must use the
machine - will be able to have a complete, legible reference on hand at all times.
This symbol will be used in the
manual to indicate actions
( misuse ) elements, behaviours
and situations that could risk
your security and the one of
other people.
NOTE: This manual concerns the use and maintenance description of the mecchanic mill graders
MT-MTL, which corrisponds largely to the hydraulic models MTLhi and MThi; the differences
between the two models will be indicated with a caption
and examined in an specific section of the manual
1 – Machine identification
Each R2 machine has a CE plate with the main details of the R2 company and of the machines.
The plate is positioned on the top center of the machine.
3
Description of the symbols used in the manual
The rounded
white pictograms will be used in
the manual to indicate the
Individual Protective Devices
necessary
machine or while making any
adjustments.
(*note n mod. hi) (n indicates the note number)
symbols with
while using the
Fig. 1
ENGLISH
This symbol will be used in this
manual to indicate that the
described operation must be
done with the walking tractor or
tractor turned off and the key
disconnected.
3