Advertisement
Ordering Information
● WD30 DeviceNet Wireless Unit
Type
DeviceNet Wireless Master
DeviceNet Wireless Slave
Magnetic base antenna (one)
*
With the WD30-AT001, only the WD-ME/SE or WD30-ME01/SE01 can be used.
● Peripheral Devices (Micro Connectors)
Name
Shielded T-branch
Connector with one
Connector
branch
Cables with connectors on
Cable with
both ends
Shielded
Cables with connector
Connectors
socket on one end
Shielded
Plug Connector
Terminator
Specifications
● General Specifications
Item
DeviceNet communications
power supply voltage
*
Current consumption
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Vibration resistance
Shock resistance
Weight
*
Select a power supply with excess capacity. (We recommend a minimum of 25 W.)
● Wireless Interface Specifications
Item
Wave type
Communications method
Frequency band
Number of channels
Antenna power
Data transfer speed between
wireless units
*
Transmission distance
Relay stations
Max. number of sets in the same
*
area
Max. number of wireless Slaves
*
Depends on many factors in the installation environment.
Dimensions
● DeviceNet Wireless Units
WD30-ME
WD30-SE
62
13
V1
WD30--ME
No.
WIRELESS UNIT
MS
NS
59.5
80
Refer to the WD30 DeviceNet Wireless Units Datasheet (Cat. No. M502, M503) or
WD30 DeviceNet Wireless Units Operation Manual (Cat. No. M071) for more detailed specifications.
128
DeviceNet Wireless Units
Number of I/O
(number of allocated words)
Pencil-type antenna
1,600 inputs max. (100 words)
1,600 outputs max. (100 words)
Magnetic base antenna
Pencil-type antenna
512 inputs max. (32 words)
512 outputs max. (32 words)
Magnetic base antenna
--
Specifications
Model
Screws
DCN2-1
Smart Click
DCN2-1S
Screws
DCA1-5CN@@W1
Smart Click
DCA1-5CS@@W1
Screws
DCA1-5CN@@F1
Smart Click
DCA1-5CS@@F1
Screws
DRS2-1
Smart Click
DRS2-1S
Specifications
11 to 25 VDC
(supplied from the communications connector)
4 W (350 mA max. (startup), average: 120 mA)
-10°C to 50°C
25% to 85% (with no condensation)
-20°C to 65°C
10 to 55 Hz, 0.35-mm amplitude at 50 m/s
acceleration with 10 sweeps in X, Y and Z directions
for 8 minutes each
150m/s
, 6 directions, 3 times each
2
Approx. 200 g
Specifications
Spread Spectrum (direct sequence; DS-SS)
Simplex (half duplex)
2.4 GHz (2401 MHz to 2480.2 MHz)
66 channels
10 mW
100 kbps
Indoors:
60 m (approx. 50 m with magnetic base
antennas)
Outdoors: 300 m (unobstructed)
3 repeaters max.
10 sets max.
64 max.
● DeviceNet Wireless Units
WD30-ME01
WD30-SE01
16
74
159
WD30--ME
WIRELESS UNIT
MS
NS WS
85
35
WD30
Antenna type
Model
WD30-ME
WD30-ME01
WD30-SE
WD30-SE01
--
WD30-AT001
● Peripheral Devices
Configurator (PC Card)
Configurator Software
FA Integrated Tool Package
Note: For details on peripheral devices, refer to this catalog.
*
The price depends on the license.
● DeviceNet Interface Specifications (Summary)
Item
Communications
*
functions
Self-diagnostic
functions
2
Device profiles
*
FINS message communications are not supported. Explicit messages must be
handled in the ladder program. Refer to the WD30 DeviceNet Wireless Units
Operation Manual for details.
● Compliance with China Radio Standards
In China, radio frequency channel 51 cannot be used. Use channels 2
to 34 or channels 52 to 83. Also, use is prohibited on or near aircraft.
● Certified Standards
Approved radio
standards
Compliant radio
standards
Approved standards
Compliant standards
● Compliance with UL Standards
Use a class 2 power supply for compliance with UL standards.
Main class 2 power supply: OMRON S8VS (30 W or 60 W)
Switching Power Supply
13
V1
No.
85
59.5
35
80
● Enclosed Accessories
The following accessories are included with
a Wireless Master or Wireless Slave.
• Two Antennas
• Instruction Sheet
• Declaration of CE marking certification
*
• Two M4 screws (with nuts, flat washers,
and spring washers)
Name
Specifications
Master/Slave
Remote I/O functions, Explicit message
connections
communications
WDT error, hardware errors (such as memory
Unit
and CAN errors), and setting errors
DeviceNet
Duplicate node address errors, Bus OFF
communications
detection, and connection timeout
Refer to Appendix A of the WD30 DeviceNet
Wireless Units Operation Manual for various
Communication
DeviceNet IDs (vendor, device type =
control unit
communication adapter, product code, product
revision, product name, serial number, status,
and I/O unit IDs.)
Japanese radio standards ARIB STD-T66
U.S. radio standards
FCC part15.247
Canadian radio standards IC RSS 210
Chinese radio standards
信部無 ［2002］ 353号
EU radio standards
EN 300 440-2
cULus Listing: UL508/CSA C22.2
Safety standards
No.142
Safety standards
EN 60950-1
EMC standards
EN 301 489-17
● Magnetic Base Antenna (1 Antenna)
WD30-AT001
(Included with the WD30-ME01 and WD30-SE01.)
94
115
13.3
20
35.8 dia.
39
10.5
Model
3G8E2-DRM21-V1
WS02-CFDC1-E
CXONE-AL@@C-E
(Unit: mm)
(Cable length: 2,000)
3.8 dia.
Advertisement
