Setting The Power Supply Used By The R (Power Source) - Zoom F8 Supplementary Manual

Setting the power supply used by the R (Power Source)

Set the DC power supply shutdown voltage, nominal voltage and type of batteries so that the remaining power
supply charge can be shown accurately. On this menu page, you can check the voltage of each power supply and
the remaining battery capacity.
1.
Press .
2.
Use to select USB,
and press .
3.
Use to select FRC-8,
and press .
14
4.
Use to select Power
Source, and press
R
Power settings for the
are the same as for the
See "Setting the power supply
used" in the Operation
Manual.
NOTE
When multiple power supplies are connected, they will be
used in the following order of priority.
1. DC power supply (Ext DC)
2. AA batteries (Int AA)
The voltages of each power supply are shown on the display.
.
.