Sony CDP-CX400 Operating Instructions Manual page 8

Getting Started
The disc number at the loading position appears in
the display. If the disc has a Disc Name (see page
20), the Disc Name appears instead of the disc
number. As you turn the JOG dial, the disc number
or the Disc Name changes.
2nd NEXT DISC
* D I S C - 2 *
ALL 1 DISC S SHUFFLE
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY
Disc number or the Disc Name
You can classify discs by using the Group File
function or Artist Name function. This feature lets
you easily find the disc you want to play. For
details, see "Grouping discs (Group File)" on page
24 and "Classifying discs according to Artist Name
(Artist File)" on page 26.
4
Insert a disc with the label side facing right.
With the label side
facing right
After inserting the disc, you can enter the original
disc title to replace the disc number (see "Labeling
discs (Disc Name)" on page 20) so you can locate it
easily whenever you want to play it.
2nd NEXT DISC ART.
S O N Y H I T
ALL 1 DISC S SHUFFLE
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY
5
Repeat steps 3 and 4 to insert more discs.
6
Close the front cover by pressing OPEN/CLOSE.
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always keep the front cover closed except when
inserting or removing discs.
8
ART. HIT TRACK GROUP ART. MIN STEP SEC
0 * * * *
REPEAT 1 GROUP
CD1 CD2 CD3
HIT TRACK GROUP ART. MIN STEP SEC
S * * * * *
REPEAT 1 GROUP
CD1 CD2 CD3
CAUTION
• Do not insert an 8 cm (3-inch) CD adaptor.
The player cannot play an 8 cm CD. Do not insert an
8 cm (3-inch) CD or an 8 cm (3-inch) CD adaptor
(CSA-8). It may damage the player and disc.
• Do not move the player after inserting discs.
• Be sure to place the player in a flat, horizontal
position. Do not place the player in a slanted
position.
• Do not move the player and avoid any physical
shock after inserting discs.
• When transporting the player, remove all discs
from the player.
• Make sure to insert the disc at a right angle to the
rotary table.
If the disc is not inserted into the slot completely (ex.
when you press A), reinsert the disc at a right angle
to the rotary table.
Disc that is not fully inserted
• Do not attach seals or stickers, etc. to CDs.
If seals or stickers, etc. are attached to a CD, the
player may not operate properly and the player or
the disc may be damaged.
Notes
• If you drop a disc into the player and/or the CD does
not go into the slot correctly, consult your nearest Sony
dealer.
• Make sure the rotary table comes to a complete stop
before inserting or removing discs.
• The front panel closes automatically when you press
H. Be careful not to put your hand into the player
after pressing H, otherwise your hand may be caught
in the front panel.