Playing Using A Timer - Sony CDP-CX260 Operating Instructions Manual

3
Select the desired program by pressing the Easy
scroll key up or down, then press Easy scroll key.
P r o g r am
d a t a t r a n s f e r
D i s c 4
* D I SC 4 *
T r a c k 1
( TRACK 1 )
Program Play starts when the player finishes
loading the program data from the remote.
If the player fails in loading, the following
message appears. Press the Easy scroll key again.
d a t a t r a n s f e r
f a i l u r e !
T r y a g a i n !
Note
The program you create using the remote is stored in the
player as PROGRAM 1. Note that the PROGRAM 1 you had
created before is erased.
CD1
CD1
Playing CDs Getting Started

Playing Using a Timer

You can start playing a disc at any given time by
connecting a timer (not supplied). Refer also to the
instructions for the timer if you need help.
TIMER
1
Press one of the play mode buttons to select the
desired play mode.
2
Set TIMER on the player to PLAY.
3
Set the timer to the desired time.
The player turns off. When the set time comes, the
player turns on and starts playing.
4
After you have used the timer, set TIMER on the
player to OFF.
Playing CDs Playing CDs
Play mode buttons
25