Table of Contents
Advertisement
Quick Links
1/2 in. HEAVY DUTY IMPACT WRENCH
BRIGGS & STRATTON CORPORATION
MILWAUKEE, WISCONSIN, U.S.A.
BRIGGS & STRATTON IS A TRADEMARK OF BRIGGS & STRATTON CORPORATION AND IS USED UNDER LICENSE TO ALTON INDUSTRY LTD. GROUP
Operator's Manual
Product Model # 6381-00
Manual # 80018889
Read and understand this
instruction manual thoroughly
before using the product. It
contains important information
for your safety as well as
operating and maintenance
advice.
Advertisement
Table of Contents
Summary of Contents for Briggs & Stratton 6381-00
- Page 1 1/2 in. HEAVY DUTY IMPACT WRENCH Operator’s Manual Product Model # 6381-00 Manual # 80018889 Read and understand this instruction manual thoroughly before using the product. It contains important information for your safety as well as BRIGGS & STRATTON CORPORATION operating and maintenance advice.
- Page 2 Thank you for purchasing this quality-built Briggs & Stratton™ air tool. We are pleased that you’ve placed your confidence in the Briggs & Stratton brand. When operated and maintained according to the instructions in this manual, your Briggs & Stratton air tool will provide reliable service. Where to Find Us You can contact Briggs &...
-
Page 3: General Safety Information
General Safety Information 3. Always use protective eyewear which provides protection from flying particles from the front and side when using the tool. Ear protectors should also The safety alert symbol is used to identify safety be worn. information about hazards that can result in personal 4. -
Page 4: Air Supply
Air impact wrench safety instructions 5. Drain water from the air compressor tank daily, as well as any condensation in the air lines. Water in the 1. Always use the impact wrench in the manner and for air line may enter the tool and cause damage to the the functions described in this manual. -
Page 5: Technical Specifications
Technical Specifications 5. Mount a leader hose (not included) by hand into the air inlet (E). (See Figure 4) COMPONENT SPECIFICATIONS NOTE Use thread sealant tape (not included) on the male Square drive 1/2 in. (12.70 mm) plug and tighten it with a wrench for airtight connection. Free speed 7,000 RPM Do not overtighten. -
Page 6: Troubleshooting
NOTE This tool also features a grease cap (F) on the protector cover. Remove the screw in the grease cap with a hex key (not provided). Use a grease gun (not included) and insert the gun nozzle into the grease cap. Several drops of grease are recommended for lubrication. -
Page 7: Exploded Diagram And Parts List
Exploded Diagram and Parts List Description Qty. Description Qty. Part No. Part No. Main housing Retainer ring Trigger sleeve Rear rotor bearing Rear plate Trigger Trigger shaft Cylinder Screw Rotor F/R valve knob Rotor blade Valve bushing Front plate O-ring Bearing Washer Valve... -
Page 8: Limited Warranty
Briggs & Stratton™ Air Tool Warranty Policy January, 2016 LIMITED WARRANTY Briggs & Stratton™ is a trademark of BRIGGS & STRATTON CORPORATION and is used under license to Alton Industry Co. Ltd® Alton Industry Co. Ltd warrants this Briggs & Stratton brand product for a period of one year from the date of original retail purchase against defects in materials and workmanship.