Positioning Your Display; Connection Of Tv - LG 22LK33 Series Owner's Manual

A
B
CAUTION
y Disconnect the power first, and then move
y
or install the TV. Otherwise electric shock
may occur.
y If you install the TV on a ceiling or slanted
y
wall, it may fall and result in
an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
y Do not over tighten the screws as this may
y
cause damage to the TV and void your
warranty.
y Use the screws and wall mount bracket that
y
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
NOTE
y Use the screws that are listed on the
y
VESA standard screw specifications.
y The wall mount kit includes an installation
y
manual and necessary parts.
y The length of screws may differ
y
depending on the wall mount. Make sure
to use the proper length.
y For more information, refer to the manual
y
supplied with the wall mount bracket.

Positioning your display

y Image shown may differ from your TV.
y
(Only 22LK33**)
Adjust the position of the panel in various ways for
maximum comfort.
• Tilt range
injury. Use

Connection of TV

y Image shown may differ from your TV.
y
(Only 19/22/26LV25**, 22/26LV55**, 19/22LV23**)
1
Connect the antenna cable to the antenna
input port on the TV.
2
Connect the DC adapter plug to the power
input jack on the TV.
3
Connect the Power cord to the DC adapter first,
then plug the Power cord into the wall power
outlet.
ASSEMBLING AND PREPARING
DC Adapter
13