Page 1
Table of Contents Installation and Maintenance Manual PL5500 PTO Pump Assembly Kit Manufacturing, Inc. www.greatplainsmfg.com Read the installation manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! TP-71549 Cover illustration shows only selected components for one kit.
Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit.
It may also be used to alert against unsafe practices. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. Great Plains | 411-774M | 2019-09-12 Table of Contents...
Prepare for Emergencies Be prepared if a fire starts. Keep a first aid kit and fire extinguisher handy. Keep emergency numbers for doctor, ambulance, hospital, and fire department near phone. Great Plains | 411-774M | 2019-09-12 Table of Contents...
Be familiar with all implement functions. Operate machinery from the driver’s seat only. Do not leave implement unattended with tractor engine running. Wear snug-fitting clothing to avoid entanglement with moving parts. Great Plains | 411-774M | 2019-09-12 Table of Contents...
Keep all safety decals clean and legible. Replace all damaged or missing decals. Order new decals from your Great Plains dealer. Refer to this section for proper decal placement. When ordering new parts or components, also request corresponding safety decals.
Description of Unit Power Take-Off (PTO) pump assembly kit converts the hydraulic fan power source from tractor hydraulic remote to tractor Power Take-Off (PTO). Each PL5500 PTO Pump Kit includes: • a flow control valve assembly for setting fan rpm, •...
Further Assistance Great Plains Manufacturing, Inc. and your Great Plains dealer want you to be satisfied with your new PTO pump. If for any reason you do not understand any part of this manual or are otherwise dissatisfied, please take the following actions first: 1.
PTO pump. Use only a native 540 rpm 6-spline stub shaft. Extra fittings create entanglement hazards. Fittings also destabilize the shaft, and may make it 34623 impossible to adequately secure the pump against torque and shaft slip. Great Plains | 411-774M | 2019-09-12 Table of Contents...
Unplug the PTO Pump electrical harness Tractor battery is dead PTO pump electrical harness remained whenever the planter is not in use or is in store connected to the tractor battery. or transport. Great Plains | 411-774M | 2019-09-12 Table of Contents...
The fill line is: 9.15 inches (23.2 cm) above the tank bottom. If the decal (858-003C) requires replacement, adjust the center border line to this height. Great Plains | 411-774M | 2019-09-12 Table of Contents...
4. Consult your PL5500 planter Seed Rate Manual for the intended crop, noting: •Range and Transmission sprockets required, ® • correct Air-Pro seed disk (not shown), • initial Inlet shutter setting (not shown), and • initial meter pressurization. Great Plains | 411-774M | 2019-09-12 Table of Contents...
Page 13
11. Check essential personnel for long hair, scarves, cords, frays, loose flaps, and anything else that might get entangled. 12. Clear the area of dangling or loose wires, straps, cord, and other lines that might become entangled and pull someone in. Great Plains | 411-774M | 2019-09-12 Table of Contents...
540 rpm Seal Kit or as needed 1 kit per PL5500 planter Great Plains 810-904C Type: Prince PMCK-PTO-1A Consult the PTO Series Pump Parts Manual, available from Prince Manufacturing Corp: www.princehyd.com 34634 Great Plains | 411-774M | 2019-09-12 Table of Contents...
PTO for flushing and charging the system, • the PL5500 planter Operator and Parts manuals (see page 6), and • protective footwear if the PL5500 planter has coulters or row cleaners installed. Great Plains | 411-774M | 2019-09-12 Table of Contents...
EL 45 1 5/16MORB 1 5/16MJIC 841-653C EL 45 3/4MJIC 1 1/16MORB 841-814C DECAL DANGER PTO PUMP 858-005C 1/4 QUICK LINK 890-628C CHAIN WELD 1/4 GR 43 X 24 LINK 891-313C Great Plains | 411-774M | 2019-09-12 Table of Contents...
PTO pump from fully seating on 34620 the shaft. 4. With hydraulics hoses to rear, and torque arm to right of drawbar, slide the pump assembly fully onto the PTO shaft (2). Great Plains | 411-774M | 2019-09-12 Table of Contents...
Never alter or remove any existing guards on the tractor or PL5500 planter at any point of PTO pump assembly kit installation. Contact your Great Plains dealer for service. 5. With the torque arm firmly against the drawbar:...
TP-71555 1. Secure the pressure flow control valve (30) to the fan mount (27) using three bolts (22), three locking washers (24), six washers (25), and three nuts (23). TP-71556 Great Plains | 411-774M | 2019-09-12 Table of Contents...
These hoses will remain in placed and are necessary to install PTO pump assembly kit. It is recommended to mark all hydraulic hoses for convenience. 861-544C 861-544C 68689 Great Plains | 411-774M | 2019-09-12 Table of Contents...
Pressure flow control valve port top “T” (30) to adapter (31) to adapter (33) to hydraulic hose* to fan assembly. These two hydraulic hoses (861-544C) are part of the existing fan assembly and are not included in PTO pump assembly kit (403-919A). Great Plains | 411-774M | 2019-09-12 Table of Contents...
2. Operate the system, performing an initial valve adjustment, if possible. “Flow Control Valve Adjustment” on page 12. Close-out 1. Remove any part numbering tags, grease pencil markings, and any parts no longer in use. 2. Consider responsibly recycling any unneeded fluids and waste. Great Plains | 411-774M | 2019-09-12 Table of Contents...
4 ORB w/jam nut away from washer. Thread fitting into receptacle 27-43 37-58 until O-ring contacts seats. Unscrew fitting to 4 ORB straight desired orientation. Tighten jam nut to torque specification. Great Plains | 411-774M | 2019-09-12 Table of Contents...
Water Hexagonal United States Standard Hydraulic Hoses W, W/ with HHCS Hex Head Cap Screw WLDMNTS Weldment horsepower ® Hydraulic Yield-Pro IMPL Implement ZNYCR Zinc Chromate in, IN inch INST Installation Great Plains | 411-774M | 2019-09-12 Table of Contents...
Need help?
Do you have a question about the PL5500 PTO and is the answer not in the manual?
Questions and answers