3a: Connecting the audio components
How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to "4: Connecting the antennas" (page
32).
Component to be connected
Component
With
Super Audio
Digital audio output
CD player/CD
Multi-channel audio
player
b)
output
Analog audio output
c)
only
MD deck/Tape
Digital audio output
deck/Turntable
Analog audio output
c)
only
a)
Model with DIGITAL OPTICAL OUTPUT or
DIGITAL COAXIAL OUTPUT jack etc.
b)
Model with MULTI CH OUTPUT jacks, etc. This
connection is used to output audio decoded by the
component's internal multi-channel decoder
through this receiver.
c)
Model equipped only with AUDIO OUT L/R
jacks, etc.
Page
a)
18
20
21
a)
18
21
17
US