Sony STR-DG710 Operating Instructions Manual page 8

Name Function
G DTS/
"DTS" lights up when the
DTS-ES/
receiver is decoding DTS
DTS 96/24 signals. "DTS-ES" lights up
when the receiver is decoding
DTS-ES signals. "DTS 96/24"
lights up when the receiver is
decoding DTS 96/24 (96 kHz/
24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
"ANALOG" (page 67).
H CAT
Lights up when "ALL CAT"
mode is changed to "ONE
CAT" mode during XM Radio
operation (page 63).
I MEMORY
Lights up when a memory
function, such as Preset
Memory (page 58), etc., is
activated.
J Tuner
Lights up when using the
indicators receiver to tune in radio
stations (page 55), etc.
K Preset
Lights up when using the
station
receiver to tune in radio
indicators stations you have preset. For
details on presetting radio
stations, see page 57.
L D.RANGE
Lights up when dynamic range
compression is activated (page
37).
M NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 50).
N COAX
Lights up when INPUT MODE
is set to "AUTO IN" and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to
"COAX IN" (page 67)
O HDMI
Lights up when the receiver
recognizes a component
connected via a HDMI IN jack
(page 18).
8
US
Name Function
P Playback
The letters (L, C, R, etc.)
channel
indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
L Front Left
R Front Right
C
Center (monaural)
SL Surround Left
SR Surround Right
S
Surround (monaural or the
surround components obtained
by Pro Logic processing)
SB Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When
surround speakers are set to
"NO" (page 39)
Sound Field: A.F.D. AUTO
SW
L C R
SL SR