Download Print this page
SPX Power Team J24T Parts List And Operating Instructions
SPX Power Team J24T Parts List And Operating Instructions

SPX Power Team J24T Parts List And Operating Instructions

Hydraulic toe jack, maximum capacity: 2/5/10 ton

Advertisement

Quick Links

SPX Corporation
5885 11th Street
Rockford, IL 61109-3699 USA
Internet Address:
http://www.powerteam.com
Read and carefully follow the warnings and operating instructions before using this jack. Most problems with new
equipment are caused by improper operation or setup.
NOTE: Inspect the jack upon arrival. The carrier, not the manufacturer, is responsible for any damage
resulting from shipment.
W W A A R R N N I I N N G G : :
Do not exceed the maximum load capacity of the jack.
Do not add additional load to a lifted load.
Do not use in unstable or hazardous positions.
Unit must be used on flat surfaces able to carry the load.
Keep clear of lifted loads.
The load must be stable during lifing. An unstable load may cause the jack or load to slip.
Do not use the jack(s) if damaged, altered, or in poor condition.
Do not lift people or loads with people on them.
This hydraulic jack is for professional use only and should be used only by persons trained in its use.
Do not lift at the end of the toe. Fully engage the load with the toe.
Use only Power Team hydraulic fluid in this unit.
Do NOT, under any circumstances, tamper with the adjustment of the jack's internal relief valve screw. To
do so may cause the jack to fail.
Read operating instructions and A.N.S.I. B30.1 safety code for jacks.
The owner of the jack must ensure that all safety-related decals are maintained and replaced as they
become hard to read.
This guide cannot cover every situation, so always do the job with safety first.
© SPX Corporation
Tech. Services: (800) 477-8326
Fax: (800) 765-8326
Order Entry: (800) 541-1418
Fax: (800) 288-7031
HYDRAULIC TOE JACK
Part Number J24T Maximum Capacity: 2 Ton
Part Number J55T Maximum Capacity: 5 Ton
Part Number J106T Maximum Capacity: 10 Ton
SAFETY PRECAUTIONS
To help prevent personal injury or damage to equipment,
®
Parts List and
Operating Instructions
for:
Sheet No.
Rev. 2
Form No. 102947
J24T
J55T
J106T
1 of 5
Date: 28 Dec. 1998

Advertisement

loading

Summary of Contents for SPX Power Team J24T

  • Page 1 The owner of the jack must ensure that all safety-related decals are maintained and replaced as they become hard to read. • This guide cannot cover every situation, so always do the job with safety first. Sheet No. 1 of 5 © SPX Corporation Rev. 2 Date: 28 Dec. 1998...
  • Page 2: Preventive Maintenance

    Parts List and Operating Instructions, Form No. 102947, Back sheet 1 of 5 OPERATING INSTRUCTIONS IMPORTANT: Do not carry the jack by the jacking lever. Lifting a Load 1. Position the load on the toe of the jack. W W A A R R N N I I N N G G : : Do not lift a load on the end of the toe.
  • Page 3: Troubleshooting Guide

    Parts List and Operating Instructions Form No. 102947 TROUBLE-SHOOTING GUIDE Repair procedures must be performed in a dirt-free environment by qualified personnel who are familiar with this equipment. TROUBLE CAUSE SOLUTION Erratic Action 1. Air in system 1. With jack sitting on its base and ram retracted, bleed air by opening release valve.
  • Page 4 Parts List and Operating Instructions, Form No. 102947, Back sheet 2 of 5 PARTS LIST FOR 2 TON JACK (J24T) * = Parts marked with an asterisk (*) are in Repair Kit No. J24T-26.
  • Page 5 Parts List and Operating Instructions Form No. 102947 Item Part Req’d Description J24T-1 Handle J24T-2 Snap Ring J24T-3 Handle Socket Assembly J24T-4 Pump Plunger Pin J24T-5 Pump Plunger J24T-6 Release Assembly J24T-7 Safety Valve Push Nut J24T-8 Safety Valve Plug J24T-9 Safety Valve Adjusting Screw J24T-10...
  • Page 6 Parts List and Operating Instructions, Form No. 102947, Back sheet 3 of 5 PARTS LIST FOR 5 TON JACK (J55T) * = Parts marked with an asterisk (*) are in Repair Kit No. J55T-28.
  • Page 7 Parts List and Operating Instructions Form No. 102947 Item Part Req’d Description J55T-1 Handle J55T-2 Snap Ring J55T-3 Handle Socket Assembly J55T-4 Pump Plunger Pin J55T-5 Pump Plunger J55T-6 Pump Stop A J55T-7 Pump Stay Pin J55T-8 Pump Base J55T-9 Pump Stop B J55T-10 Safety Valve Ball...
  • Page 8 Parts List and Operating Instructions, Form No. 102947, Back sheet 4 of 5 PARTS LIST FOR 10 TON JACK (J106T) 14 37 * = Parts marked with an asterisk (*) are in Repair Kit No. J106T-32. Note: Shaded areas reflect last revision made to this form.
  • Page 9 Parts List and Operating Instructions Form No. 102947 Item Part Req’d Description J106T-1 Handle J106T-2 Snap Ring J106T-3 Handle Socket Assembly J106T-4 Pump Plunger Pin J106T-5 Pump Plunger J106T-6 Pump Stop A J106T-7 Pump Stay Pin J106T-8 Pump Base J106T-9 Pump Stop B J106T-10 Safety Valve Ball...

This manual is also suitable for:

Power team j55tPower team j106t