1. Product Introduction TIME : Shows the duration of a single exercise, and returns to zero after restarting. STEPS: Displays the cumulative number of steps in a single exercise and returns to zero after restarting. DISTANCE : Shows the number of accumulated mileage in a single exercise and returns to zero after restarting.
Page 4
Startup: During the start of the iQ Slim Tread, the middle position of the display is three horizontal and six grids. The green prompt line will be displayed in sequence. Successful start is three horizontal and six grids. The green cue line continues to display and begins recording motion data.
Assembly Instruction for the handrail: 1.Put iQ SLIM TREAD face down.make sure there are no srarp items and no in-purity on the floor, a110id scratches of the surface of the iQ SLIM TREAD. 2Put handrail face down.overlap ooth sides of iQ SLIM TREAD.
Page 6
3. Children should not try and start unit. Usually feet are too small to start. 4. To slow to start the iQ Slim Tread at time intervals between 2 steps cannot be longer than 1.5 second can cannot be started if steps not continuous.
Page 7
How to slow down in the constant speed area? The user moves from constant speed area to deceleration area and walks for about 5 seconds and the speed will decelerate. If you continue to move for about 5 seconds in the deceleration area, the machine will gradually stop running.
During use, the armrest is pulled back more than 90 degrees vertically to stop the machine. The displ shows OFF (Then it needs user to leave machine and restart the machine when ready) Emergency stop function:...
Wakeup In the deceleration ares of iQ Slim Tread, the heel does not leave the running belt and evenly raises the of the foot within 5 seconds to wake up machine. During the wake-up process, the display will light up as below pie l,pic 2 and pie 3.Now the unit wakes up.
Page 10
Tread will be 8KM/h. When the handrail is folded, the max speed is 6km/h. Storage The weight of the iQ Slim Tread is only 24kg and the front end of the walking machine has a pair of moving wheels. When moving the unit, user...
Page 11
Slim Tread. We do not bear the problems or consequences caused by abnormal operation and use. 1. Do not insert any other item in any part of iQ Slim Tread to avoid dam age.
Page 12
14. Unplug the power after using the iQ Slim Tread. If you do not use it for a long time without cutting off the power, it may damage the equipment.
Page 13
18. The power cable of the iQ Slim Tread is a special one. If the power cable is damaged, it must be replaced by a certified trechnician from from Redfern Ent.
Page 14
- otherwise it may cause fire or electric shock. 6. Do not use iQ Slim Tread for 2 or more people at the same time. Be careful not to let the people around you close during use; otherwise, accidents or injuries may occur due to falling.
The iQ Slim Tread fully upgrades the running board and running belt technology, the running plate density and lubrication degree is increased by 10-15 times, the frictional resistance coefficient ( Cx) is 50% lower than that of the traditional treadmill, and the walking machine is oiled when it leaves the factory.
DAYS FROM DATE OF PURCHASE ANY IQ SLIMTREAD RETURNED TO REDFERN ENTERPRISES MUST BE PACKED AND SHIPPED BY A REDFERN ENTERPRISES APPROVED CARRIER TO MAINTAIN THE VALIDITY OF THIS WARRANTY. THE WARRANTY COVERS IN HOME SERVICE (AT REDFERN ENTERPRISES DISCRETION). PACKING AND RETURN SHIPPING TO REDFERN ENTERPRISES.
Need help?
Do you have a question about the iQ Slim Tread and is the answer not in the manual?
Questions and answers