RGB LED Colorflex Quick Start Manual

Advertisement

Quick Links

LED RGB ColorFlex
LED Cove Lighting
4016 Harry Hines Blvd Dallas, Texas 75219 • 972-650-1855

General Description:

Designed for commercial outdoor linear light-
ing, RGB LED ColorFlex is Ideal architectural
linear lighting that can be used in indoor or
outdoor applications. It uses the similar flexible
printed circuit board technology that LED Flex
Strips use but with a thicker gauge PCB and an
IC chip to regulate the voltage for longer runs
of up to 98.5 feet (30 meters). It has a durable
UV stable PVC cover allowing it to be used out-
side with a rating of IP65.

Features:

Available in 24 volts DC.
Super Bright 5050 SMD LEDS Thin, sleek and
Flexible.
Little or no heat.
IC Design for continuous run lengths of up to
98.5 feet (30 meters) Long life span of LED
lights up to 30,000hrs*.
PVC Cover for indoor or outdoor applications
IP65.
Continuous length flexible LED light strips
Solid-state, high vibration resistant SMD chips.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LED Colorflex and is the answer not in the manual?

Questions and answers

Summary of Contents for RGB LED Colorflex

  • Page 1 LED Cove Lighting General Description: Designed for commercial outdoor linear light- ing, RGB LED ColorFlex is Ideal architectural linear lighting that can be used in indoor or outdoor applications. It uses the similar flexible printed circuit board technology that LED Flex...
  • Page 2 LED RGB ColorFlex LED Cove Lighting Specifactions: Item: SC-AF01-28-30M-RGB-24V: Max voltage: 24 VDC (regulated power supply only) Watts: 5.8 / Meter (1.8ft) Amps: 7.5A Roll (0.25/Meter) Dimensions: 12mm x 17mm Light source: 28pcs/ Meter 5050LED LED Spacing 35.7mm LEDs Type:...
  • Page 3 To continue with another separate roll, use a signal repeater or DMX decoder.   LED Cove Lighting RGB Control System         Power supply 24VDC (7.5A) + LED RGB Controller -Outdoor Rated power supply (UL/CSA Type)            ...
  • Page 4 Step 8: Screw the connector together using a criss-cross pattern to ensure uniform and even pressure on the connecter while screwing it together. Step 9: Test the RGB strip by lighting one color at a time. Note the following when testing: ·...

Table of Contents