Huawei SUN2000-8KTL-M0 User Manual page 30

SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0
User Manual

To prevent dust inhalation or contact with eyes, wear safety goggles and an anti-dust
respirator when drilling holes.

Clean up any dust in and around the holes using a vacuum cleaner and measure the
distance between holes. If large hole tolerance exists, position and drill holes again.

After removing the bolt, spring washer, and flat washer, level the front of the expansion
tube with the concrete wall. Otherwise, the mounting brackets will not stay steady on the
concrete wall.

Partially loosen the nut, flat washer and spring washer of the two expansion bolts below.
Figure 4-9 Installing the Mounting Bracket
Step 3 Install the SUN2000 onto the mounting bracket.
Step 4 Tighten nuts.
Figure 4-10 Installing the SUN2000
Step 5 (Optional) Install the anti-theft lock.
Issue 03 (2019-07-19) Copyright © Huawei Technologies Co., Ltd.
4 Installation
24