Chapter - 2. Install; Location- Dry/Indoors; Attaching The Mcs-Wireless-Modem To The Mounting Bracket - Micro control systems MCS-WIRELESS-MODEM Installation And Reference Manual

MCS-WIRELESS-MODEM
Chapter - 2.
2.2.

LOCATION- DRY/INDOORS

1) Attach the bracket to the wall (indoors, dry location) or other surface with screws.
NOTE: Screws are not provided because the type of screw required depends on the
mounting surface.
2.1.

ATTACHING THE MCS-WIRELESS-MODEM TO THE MOUNTING BRACKET

2) Place the router's edge against the bottom of the bracket.
3) Press the router down firmly, then push it inside the bracket.
It should latch.
INSTALL
COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
2.2.1 Attaching the COR to the Mounting Bracket
© 2014 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
5
REVISION 2.0
1) Attach the bracke
NOTE: Screws are not p
depends on the mountin
2) Place the router's
against the bottom o
bracket.
3) Press the router d
firmly, then push it i
the bracket. It shoul
latch.
FOR MORE HELP AND