Sony STR-DE698 Operating Instructions Manual page 59

Models of area code AR
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
(8 ohms 1 kHz, THD 0.7%)
(8 ohms 1 kHz, THD 10%)
1)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
(8 ohms 1 kHz, THD 0.7%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
(8 ohms 1 kHz, THD 10%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
1) Measured under the following conditions:
Area code
U, CA
CEL, CEK, AR
E2/E3, AU
2) Depending on the sound field settings and the
source, there may be no sound output.
3) Measured under the following conditions:
Area code
AR
Frequency response
MULTI CH IN, SA-CD/
CD, MD/TAPE, DVD,
AUX, VIDEO 1, 2, 3
1)
80 W + 80 W
3)
70 W + 70 W
1)
100 W + 100 W
3)
90 W + 90 W
1)
120 W + 120 W
3)
110 W + 110 W
110 W/ch
110 W
110 W/ch
110 W/ch
120 W/ch
120 W
120 W/ch
120 W/ch
150 W/ch
150 W
150 W/ch
150 W/ch
Power requirements
120 V AC, 60 Hz
230 V AC, 50 Hz
240 V AC, 50 Hz
Power requirements
220 V AC, 50 Hz
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Inputs (Analog)
MULTI CH IN, SA-CD/
CD, MD/TAPE, DVD,
AUX, VIDEO 1, 2, 3
4) INPUT SHORT (with sound field and equalizer
bypassed).
5) Weighted network, input level.
Inputs (Digital)
DVD, SA-CD/CD
(Coaxial)
VIDEO 2, 3, MD/TAPE,
SA-CD/CD (Optical)
Outputs (Analog)
MD/TAPE (OUT),
VIDEO 1 (AUDIO OUT)
SUB WOOFER
Outputs (Digital)
MD/TAPE (Optical)
Equalizer
Gain levels
Sensitivity: 500 mV
Impedance: 50 k ohms
4)
S/N : 96 dB
5)
(A, 500 mV )
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 k ohms
Voltage: 2 V
Impedance: 1 k ohm
Sensitivity: –
±6 dB, 1 dB step
continued
GB
59