Other Operations; Naming Preset Stations And Inputs - Sony STR-DE698 Operating Instructions Manual

Other Operations

Naming preset stations
and inputs
You can enter a name of up to 8 characters for
preset stations and inputs selected with input
buttons, and display it in the receiver's display.
Use the buttons on the receiver for the operation.
1
To index a preset station
Press TUNER FM/AM repeatedly to
select the FM or AM band, then tune in
the preset station you want to create an
index name for (page 26).
To index an input
Press the input button to select the
input you want to create an index name
for.
2
Press MAIN MENU repeatedly to select
" CUSTOM ".
3
Press or
"NAME IN".
4
Press ENTER.
The cursor flashes and you can select a
character.
5
Use or
index name.
Turn the –/+ jog dial to select a character,
then press > to move the cursor to the next
position.
GB
42
repeatedly to select
and –/+ jog dial to create an
Tips
• You can select the character type as follows by
turning the –/+ jog dial.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, turn the –/+ jog dial until
a blank space appears in the display.
• If you made a mistake, press < or > repeatedly
until the character you want to change flashes,
then turn the –/+ jog dial to select the correct
character.
6
Press ENTER to store the index name.
Note (Models of area code CEL, CEK only)
When you name an RDS station and tune in the station,
the Program Service name appears instead of the name
you entered. (You cannot change the name of a
Program Service name. The name you entered will be
overwritten by the Program Service name.)