Download
Share
Print this page
  1. Manuals
  2. Brands
  3. eControls Manuals
  4. Control Unit
  5. RT2
  6. User& installer's manual

eControls RT2 User& Installer's Manual

Wireless whf control
Hide thumbs Also See for RT2:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Smart
WHF Controls
The RT2 is a wireless whole house fan control that
can be placed on a night table, installed on a wall
or used anywhere in the home to control the Whole
House Fan using temperature control for improved
comfort and energy efficiency or a built-in 1 to 8-
hour timer. The fan speed can be set from the
remote.
Controls the whole house fan wirelessly from
anywhere in the home.
Uses temperature control of the WHF to improve
comfort and energy efficiency.
Or uses the built-in 1 to 8-hour timer.
Wireless range is 125' in a home or building.
Displays the outdoor
temperature when an outdoor
temperature sensor is installed.
Displays the WHF speed.
Indicates the RT2 is linked to
the RM2 receiving module.
MENU Key accesses
user options such as
Temperature or Timer Control.
User & Installer Manual
Outdoors
Indoors
o
F
Cool
Link
ed
Set To
Econo
Cooling
ON
Menu
Model RT2
Wireless WHF Control
Model RT2
Wireless WHF Control
Pat. Pend.
Displays the indoor temperature.
Use the Up/Down keys to change
temperature setting for WHF cooling.
Displays the temperature setting for
WHF cooling.
Use this key to turn WHF cooling
On or Off.
Slide battery cover off to replace
the two AA batteries.
eControls
eControls
Rev Nov 2018

Advertisement

loading

Related Manuals for eControls RT2

Summary of Contents for eControls RT2

  • Page 1 Wireless WHF Control WHF Controls Rev Nov 2018 The RT2 is a wireless whole house fan control that can be placed on a night table, installed on a wall or used anywhere in the home to control the Whole House Fan using temperature control for improved comfort and energy efficiency or a built-in 1 to 8- hour timer.
  • Page 2 USER MENU OPTIONS Turning the Safety Timer On or Off Select Temperature or Timer Control The RT2 includes a Safety Timer option that is used in Turning the Safety Timer On or Off Temperature Control. The option is defaulted to On and...

  • Page 3: Temperature Control Operation

    Link Set To the WHF cooling temperature. The WHF is turned Off by Outdoors Indoors the RT2 when the cooler outdoor air has lowered the Econo Cooling indoor temperature 1 degree below the WHF cooling Menu temperature. The WHF will cycle On and Off as needed to keep the space comfortable.
  • Page 4 HOMEOWNER SECTION TIMER CONTROL OPERATION (cont.) WHOLE HOUSE FAN OPERATION End a Timer Interval CHANGE THE WHOLE HOUSE FAN SPEED If WHF is 2-speed or variable speed, the speed can be The Timer cycle can be terminated by turning EconoCool changed by pressing where the speed is displayed.

  • Page 5: Installation

    INSTALLER SECTION INSTALLATION Homes with plaster walls with steel lathe may ATTENTION INSTALLER experience wireless communication interference Wire FC2J control board to WHF. Install control board when using wireless controls. in single gang electrical box located on WHF. CAUTIONS Connect the FC2J control board to the RM2 radio module using Plug&Play cable provided.
  • Page 6 RJ11 7-foot cable supplied with FC2J Plug one end of the cable into the FC2J and the other end into the RM2 Radio Module. The RT2 wireless control is now ready to communicate with the RM2 and FC2J Wire Connects control the FC2J.

  • Page 7: Installer Options

    (Only required when using more than 1 WHF) MENU key for about 7 Set ADDRESS number seconds until Option 01 is (Only required if other RT2 installations within 300 feet) displayed. Cool Select Type of WHF Linked...
  • Page 8 Set the FAN Number Set the Type of WHF The RT2 and the RM2 are factory set to FAN 1. If only using The type of WHF is set on the RT2 thermostat by the installer one WHF, proceed to Option 2. Up to 8 WHFs can be used in a using the Installer options.