Using The Sleep Timer - Sony STR-DE345 Operating Instructions (STR-DE345) Operating Instructions Manual

Receiver Operations
Recording on a video tape
You can record from a TV or a satellite receiver using
the receiver. You can also add audio from a variety of
audio sources when editing a video tape. See your
VCR's instruction manual if you need help.
1
Press TV/SAT to select the program source.
2
Set the component to be ready for playing.
For example, turn on the TV and TV tuner.
3
Insert a blank video tape into the VCR for
recording.
4
Start recording on the VCR.
You can replace audio while editing a video tape
At the point you want to start adding different sound,
press another function button (for example, CD) and
start playback. The sound from the selected component
will be recorded over the original audio.
To resume recording the original sound, press the
TV/SAT function button.
Note
You cannot record the audio and video signal during
5.1 CH/DVD mode.
14 GB

Using the Sleep Timer

You can set the receiver to turn off automatically at a
time you specify.
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
n 2:00:00 n 1:30:00 n 1:00:00 n 0:30:00 n OFF
The display dims after you specify the time.
You can check the time remaining before the
receiver turns off
Press SLEEP on the remote. The remaining time appears
in the display.