Boot Settings Configuration - Asus Crosshair IV Extreme Manual

�.�.2

Boot Settings Configuration

Boot Settings Configuration
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait for 'F1' If Error
Hit 'DEL' Message Display [Enabled]
Quick Boot �Enabled�
Allows you to enable or disable the Quick Boot function.
[Disabled]
[Enabled]
Full Screen Logo �Enabled�
This allows you to enable or disable the full screen logo display feature.
[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo3™ feature.
AddOn ROM Display Mode �Force BIOS�
Sets the display mode for option ROM.
[Force BIOS]
[Keep Current] .
Bootup Num-Lock �On�
Allows you to select the power-on state for the NumLock.
[On]
[Off]
Wait for 'F1' If Error �Enabled�
When set to [Enabled], the system waits for the <F1> key to be pressed when error
occurs.
Hit 'DEL' Message Display �Enabled�
When set to [Enabled], the system displays the message "Press DEL to run Setup"
during POST.
3-40
Crossfire IV Extreme BIOS Setup
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
When set to [Disabled], BIOS performs all the POST items.
When set to [Enabled], BIOS skips some power on self tests
(POST) while booting to decrease the time needed to boot the
system.
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
Boot
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Version 0243
Chapter 3: BIOS Setup