Sony HT-DDW840 Operating Instructions Manual page 38

Adjustments using the SET UP
button (continued)
Initial settings
Parameter
C.MODE.AVX
*
PRO LOGIC
* HT-DDW840 only
x Selecting the command mode of the
remote (C.MODE.AVX)
Lets you select the command mode of the
remote. Change the command mode when you
use 2 Sony receivers in the same room.
x 2ch decode mode (
Lets you specify the type of decoding for the 2
channel source. This receiver incorporates with
Dolby Pro Logic II which has movie mode and
music mode, and the receiver can reproduce the
2 channel sound in 5.1 channel through Dolby
Pro Logic II.
• When set to "DOLBY PL", the receiver
performs the Pro Logic decoding. The source
recorded in 2 channel is decoded into 4
channels.
• When set to "II MOVIE", the receiver performs
the Pro Logic II movie mode decoding. This
setting is ideal for the movies encoded in Dolby
Surround. Besides, this mode can reproduce the
sound in 5.1 channel when watching the videos
of old movies or in the dubbed language.
• When set to "II MUSIC", the receiver performs
the Pro Logic II music mode decoding. This
setting is ideal for the normal stereo sources,
such as CDs.
Note
Dolby Pro Logic II does not function for DTS or
MPEG format signals.
GB
38
Initial setting
AV2
II MOVIE
)
PRO LOGIC