EDF EO Mini Pro User Manual page 3

2. CONNECTING THE EO MINI PRO TO THE INTERNET
The process for connecting the EO Mini Pro can be summarised into the following steps:
1. Download the GoElectric app onto a smart phone
2. Using the app, connect to the wifi hotspot created by the EO Mini Pro
3. Configure the EO Mini Pro to join a wifi network with access to the internet
At this point it is possible to view the status of the EO Mini Pro using either the app or through the dashboard on a personal computer.
2.1 Connecting the EO Mini Pro to the Internet
1. Install the GoElectric app onto your mobile device.
2. Log into the GoElectric app. If you do not have an account, create one.
3. Select Add JuiceNet Device on Android devices or Start on iOS devices.
Android
Mini Pro User Guide I April 2019
iOS 4. Select Connect
Now.
5. Have the WiFi network 6. Turn on the circuit
password ready, then breaker for the EO
turn off the circuit Mini Pro. In the
breaker for the EO app, select Next.
Mini Pro. In the app,
Note: After powering
select Next.
the EO Mini Pro, steps
7 through 9 must be
completed within
2 minutes.
7. Connect to the
EO Mini Pro's WiFi
network.
3