Programming The Kenwood Tk-X80 Series Mobile; Radio Format; Programming Optional Features - Kenwood TK-880 Programming Instructions Manual
W/ kenwood kct-19 option connector for use with pyramid communications 2012; pyramid communications 2016; pyramid communications merlin;
Hide thumbs
Also See for TK-880:
- Service manual (75 pages) ,
- Instruction manual (49 pages) ,
- Programming instructions manual (15 pages)
Table of Contents
Advertisement
Programming the Kenwood TK-x80 Series Mobile
To begin programming your TK-x80 series mobile for use with the Pyramid
Communications Model 2012/Merlin/2016 mobile data terminal system, you will need to
first create a new profile using your KPG -49D programming software.
Radio Format
When programming the radio select trunking or conventional, make sure that you set the
Radio Format correctly upon creation of your new profile. See figure below.
Select Trunking
or Conventional
Programming Optional Features
From the Edit pull down menu, select Optional Features. Depending on your
application, most of the parameters in the Optional Feature menu will be left at default.
Although this may be the case, in order to enable a data terminal interface you must
program Com 2 (Internal Port) as AUX Hook/PTT. This enables the external PTT from
the data terminal . See the figure below for more information.
+------------------------------------------------------------------------------ +
¦
¦--------------------------------------------- --------------------------------- ¦
¦ System Name Text Size : [Off]
¦ Power On Tone
¦ Control Tone
¦ Warning Tone
¦ Minimum Volume
¦ Tone Volume
¦ Sub LCD Display
¦ Conv. Busy LED
¦ Display Character
¦ Off Hook Decode
¦ Off Hook Horn Alert
¦ Horn Alert Time
¦ Radio Password
¦ Data Password
¦ Power On Text
¦ Com 0(Mic. Jack)
¦ Com 1(Internal Port)
¦ Com 2(Internal Port)
+----------------------------------------- ------------------------------------- +
+-------------------------- +
¦
Radio Format
¦-------------------------- ¦
¦
1. Conventional
¦
2. Trunking
+-------------------------- +
Optional Features
: [Yes]
: [Yes]
: [Yes]
: [
8]
: [Continuous]
: [None
]
: [Off]
: [Group Name]
: [Disable]
: [Disable]
: [
4]s
: [
]
: [
]
: [
] ¦ PTT Release Tone...
: [Non e
: [None
] ¦ Mode...
: [AUX Hook/PTT] ¦ Emergency...
Program Com 2 as AUX Hoot/PTT
¦
¦
¦
¦ T.O.T(Dispatch)
¦ T.O.T(TEL)
¦ TX Inhibit Time
¦ Transpond Delay Time
¦ System Search
¦ Clear to Talk
¦ Free System Ring Back : [No ]
¦ Battery Warning
¦ Signalling
¦ Encode Data Type
¦ Timed Power Off
¦ Sel. Call Alert LED
¦ PTT ID Type
¦ PTT ID
] ¦ Logic Signal...
¦
: [ 60]s
¦
: [180]s
¦
: [5.0]s
¦
: [
3]s
¦
: [None
]
¦
: [Yes]
¦
¦
: [ -------]
¦
: [OR ]
¦
: [Normal]
¦
: [Off]
¦
: [Yes]
¦
: [DTMF]
¦
: [BOT ]
¦
¦
¦
¦
¦
5
Hide quick links:
Advertisement
Table of Contents
