Roland XV-88 Turbostart page 2

PTSVNWU
,*
JB3@634>7 'K@F:7E;L7D
8VLQJWKH$USHJJLDWRU
The Arpeggiator can add a dynamic element to live
playing. Use the following procedure to activate and
use the Arpeggiator:
1. Press ARPEGGIO so it is lit.
2. Hold down several keys on the keyboard.
3. While holding ARPEGGIO, CURSOR to Style,
and use the VALUE dial to select other
Arpeggiation types.
8VLQJWKH)DYRULWH/LVW
The Favorite List allows you to keep the Patches and
Rhythm sets you like in one place for immediate access.
Use the following procedure to store and retrieve
Patches and Rhythm sets from the Favorites list:
1. Select the Patch or Rhythm Kit you would like to store.
2. Press ENTER while holding SHIFT to store your sound.
3. Press PATCH FINDER while holding SHIFT to
access the Favorite List.
4. Use the VALUE dial to select the desired Patch
or Rhythm Set.
5. To remove the selected Patch or Rhythm Set
from the favorite list, hold SHIFT and press
UNDO/COMPARE.
6. Press EXIT to leave the Favorite List.
6DYLQJ'DWDWR6PDUW0HGLD
All of the settings in internal memory can be saved as
a single file onto a SMART MEDIA card. Use the
following procedure to format and save to a SMART
MEDIA card (if you card is already formatted, skip
steps 4-7):
1. Insert the Smart Media card into the XV-88.
2. Press UTILITY.
3. CURSOR DOWN to access utility menu two.
4. CURSOR to CARD and press ENTER.
5. CURSOR to FORMAT and press ENTER.
6. Press ENTER twice to format.
Note: This will erase all of the data on the card.
7. Press EXIT twice.
8. CURSOR to SAVE and press ENTER.
9. Use the CURSOR buttons and the VALUE dial to
name the file, then press ENTER.
7%6 Ë  5RODQG &RUSRUDWLRQ 86  6 (DVWHUQ $YH /RV $QJHOHV &$ 
®
7XUER6WDUW
6HOHFWLQJ3HUIRUPDQFHV
Performances can be used to create layers, splits, or
other complex combinations of up to 16 patches and
rhythm sets, as well as for setting up the XV-88 for
sequencing. Use the following procedure to select a
Performance:
1. Press PERFORM.
2. Use the VALUE dial to select the desired
performance.
Try out the following Performances:
¾
USER: 01 Andreas Cave (Layered Patches)
¾
USER: 02 XV Piano&Bs (2-way split)
¾
USER: 11 Humanizer (Cool effects)
¾
USER: 17 SuiteCombo+ (4-way split)
The above Performances are set up for live performance
applications. If you are connecting the XV-88 to a
sequencer, check out the these Performances:
¾
PR-A: 04 SEQ: Fusion
¾
PR-A: 03 SEQ: FunkRock
¾
PR-A: 17 SEQ: World
Note: These Performances (and the entire Preset A bank)
are optimized for sequencing. They have all 16 MIDI
channels turned on and patches assigned to them. For
more information on using Performance mode, see pages
35-60 in the XV-88 Quick Start. When sequencing, you
may also need to make settings to the Local On/Off
parameter in the XV-88 – see pages 169-170 in the XV-88
Owner's Manual for information on this setting.
8VLQJWKH;9-LQ*0PRGH
General MIDI mode is very useful when playing back
Standard MIDI Files through the XV-88. Use the
following procedure to enter and use General MIDI
mode:
1. Press PERFORM while holding SHIFT.
2. Use the LEFT AND RIGHT CURSOR keys to
select Part 1-16 (displayed in the upper right
corner of the display). These parts correspond to
MIDI channels 1-16.
3. Use the VALUE dial to choose a Patch on the
selected part.
4. Press PATCH or PERFORM to exit GM mode.
)D[EDFN   3DJH