Presetting Radio Stations - Sony 2-680-009-12 (1) Operating Instructions Manual

Multi channel av receiver

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Hold down MEMORY and press

?/1 to turn the receiver back on.

"AUTO-BETICAL SELECT" appears on

the display and the receiver scans and

stores all the FM and FM RDS stations in

the broadcast area.

For RDS stations, the tuner first checks

for stations broadcasting the same

program, then stores only the ones with

the clearest signal. The selected RDS

stations are sorted alphabetically by their

Program Service name, then assigned a 2-

character preset code. For more details on

RDS, see page 52.

Regular FM stations are assigned 2-

character preset codes and stored after the

RDS stations.

When this process is finished, "FINISH"

appears on the display momentarily and

the receiver returns to normal operation.

Notes

• Do not press any button on the receiver or supplied

remote during autobetical operation, except ?/1.

• If you move to another area, repeat this procedure

to store stations in your new area.

• For details on tuning the stored stations, see

"Tuning to preset stations" (page 50).

• If you move the antenna after storing stations with

this procedure, the stored settings may no longer be

valid. If this happens, repeat this procedure to store

the stations again.