Connecting Ductwork - GE Profile PVM9005FMDS Installation Instructions Manual

MOUNT THE MICROWAVE OVEN
B5
(cont.)
Insert a self-aligning screw through top-center
3
cabinet hole. Temporarily secure the microwave
oven by turning the screw at least two full
turns after the threads have engaged. (It will be
completely tightened later.) Insert 2 self-aligning
screws (
1 4 2
holes. Turn two full turns on each screw.
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
4 Tighten the three screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
Install grease filters. See the Owner's Manual
5
packed with the microwave oven.
20
Installation Instructions
) through outer top cabinet
1 4
Filler Block
This
distance can
Equivalent
NOT exceed
to Depth
2" to ensure
of Cabinet
proper
Recess
installation
Self-Aligning Screw
B6

CONNECTING DUCTWORK

Extend the house duct down to connect to
1
the exhaust adaptor.
Seal exhaust duct joints using duct tape.
2
House Duct
49-40755 Rev.1