Subscribe to Our Youtube Channel
Related Manuals for Williams Sound Digi-Wave
Summary of Contents for Williams Sound Digi-Wave
- Page 1 Digi-Wave Dock Application Guide ™ SYSTEM EXAMPLES © 2019, Williams AV, LLC TCH 009D...
-
Page 2: Table Of Contents
Digi-Wave Dock Application Guide Table of Contents Purpose of this Guide Base Station Transmitter Base Station Receiver Teleconferencing Range Extender Interpretation with Wireless Presenter Two-Way, Two-Language Question and Answer 5 Simultaneous Talkers with a 2.0 System Extending a 2.0 Series system with 300 Series Product ... -
Page 3: Purpose Of This Guide
(c) charge Digi-Wave DLTs and/or DLRs This guide is designed to present various ways the Digi-Wave Dock can be utilized. The dock is a versatile piece of equipment, and the following examples are by no means exhaustive. These examples are provided as a starting point for more creative or complex uses. -
Page 4: Base Station Transmitter
Digi-Wave Dock Application Guide Base Station Transmitter The Digi-Wave Dock can be used as a method of transmitting audio from a sound system to the audience listening with transceivers or receivers. How it works: An audio program, presenter’s voice, etc. is sent from a sound system or other equipment to the dock line input. The dock delivers the audio to the docked transceiver which broadcasts the audio out to receivers (or transceivers) in the audience. - Page 5 Digi-Wave Dock Application Guide Unit Programming for Base Station Transmitter Unit Model Mode Priority Group Channel Location DLT 300 Master An audio program, speakers voice, etc. is sent from a sound system or other equipment to the dock input. The dock delivers the audio to the docked...
-
Page 6: Base Station Receiver
Base Station Receiver The Digi-Wave Dock can be used to receive audio from a DLT, and send this audio into a sound system. Utilized in this way, a presenter can be recorded, heard by the audience using receivers, or heard by the audience through loudspeakers. - Page 7 Digi-Wave Dock Application Guide Base Station Receiver Unit Programming Unit Model Mode Priority Group Channel Location DLT 300 Master Presenter 1-way - Main Speaker: DLR 360 Docked *The docked DLR should have it’s bay switch set to “Auto”; this keeps it powered up and it will begin receiving when the dock powers up and the Master is found.
-
Page 8: Teleconferencing
(not shown) Required Equipment: Two Digi-Wave Docks, four DLTs, four 3.5mm to RCA cables, conference microphone if desired Conference Room 2 Conference Room 1... - Page 9 (not shown). Conference Room 1 and 2 are separated by a large enough physical distance that both rooms are out of range of each other’s Digi-Wave System.
-
Page 10: Range Extender
Range Extender The Digi-Wave Dock can be used to extend the range of an existing Digi-wave System - for reaching a larger audience, reaching audiences in additional rooms or areas, or for establising two-way communication that is outside the normal range of wireless operation (shown). - Page 11 Digi-Wave Dock Application Guide Range Extender Unit Programming Unit Model Mode Priority Group Address Location DLT 300 Master 1 Docked 2-way: Area/Rm 1 Presenter DLT 300 Guest 2-way: 02 ... 99 Area/Rm 1 DLT 300 Master 1 Docked 2-way: Area/Rm 2...
-
Page 12: Interpretation With Wireless Presenter
Interpretation with Wireless Presenter The Digi-Wave Dock can be used to easily connect an IC-2 Interpreter’s console and provide a wireless transceiver for the main presenter (floor). The audience hears the interpreted language (from the IC-2 console) on Channel 1, or the original presenter on Channel 0. - Page 13 Digi-Wave Dock Application Guide Interpretation with Wireless Presenter Unit Programming Unit Model Mode Priority Group Channel Location DLT 300 Guest Docked 1-way - Interpreter: Wireless Presenter DLT 300 Master 1-way - Main Speaker: Ch. 0 Audience DLR 360 0-14 Members Docked DLT must have it’s bay switch set to “Auto”.
-
Page 14: Two-Way, Two-Language Question And Answer
When anyone in either group asks a question, the audience members hear it in their language, and they also hear the answer in their language. Required Equipment: One Digi-Wave dock, One IC-2 Interpreter’s Console, two DLTs, 3 XLR cables, one XLR-RJ45 IC-2 cable, audience DLTs/DLRs as required. Moderator listening... - Page 15 Digi-Wave Dock Application Guide Order of speaking: Interpreter Audience Member Audience Member Interpreter interprets 1st Answer speaks 1st Question speaks 2nd Question interprets 2nd Answer Spanish -> English in English in English Spanish -> English delay delay English Interpreter Audience Member...
- Page 16 Digi-Wave Dock Application Guide DLT Programming: DLT Programming: Mode: Mode: Priority: Priority: DLR Programming: DLR Programming: Group: Group: Group: Group: Address: 01 Address: 01 Address: 02...99* Address: 02...99* Talk Mode: PnL Talk Mode: PnL Spanish Talk Button: ON Talk Button: ON...
-
Page 17: Simultaneous Talkers With A 2.0 System
Five Simultaneous Talkers with a 2.0 System The 2.0 series Digi-Wave System is limited to two simultaneous talkers within the wireless system. Now the Digi-Wave Dock can be used to add three additional speakers for a total of five. This scenario is set up as one-way communication from the presenters to the audience. - Page 18 Digi-Wave Dock Application Guide Five Simultaneous Talkers with a 2.0 System Unit Programming Unit Model Mode Priority Group Address Location Dock 1 DLT 100 2.0 2-way Chairman Master Bay 1 Dock 1 DLR 60 2.0 Bay 2 Dock 2 DLR 60 2.0...
- Page 19 Digi-Wave Dock Application Guide Taking advantage of the dock’s ability to mix input signals, this configuration alllows 5 people to talk at the same time. By daisy-chaining inputs from one dock to the next, a speaker’s voice is mixed in, one at a time, to the end of the chain. The return connection from the last bay’s output back to the first bay’s input completes the chain, allowing everyone to hear, and speak to, each other.
-
Page 20: Extending A 2.0 Series System With 300 Series Product
2-way mode. Audio level adjustments will need to be made to balance voices. Required Equipment: One Digi-Wave dock, one DLT 100 2.0, one DLT 300, two XLR cables, and talker DLTs per system as required (in this example, three DLT 300’s and two DLT 100 2.0’s). - Page 21 Digi-Wave Dock Application Guide Extending a 2.0 System with 300 Series Product Unit Programming Unit Model Mode Priority Group Address Location Dock DLT 100 2.0 Chairman Master 2-way Bay 1 Presenters DLT 100 2.0 1 ** 02...99 2-way Chairman Slave (2.0 Series)
- Page 22 info@williamsav.com / www.williamsav.com 800-843-3544 / INTL: +1-952-943-2252 © 2019, Williams AV, LLC TCH 009D...
Need help?
Do you have a question about the Digi-Wave and is the answer not in the manual?
Questions and answers