Sony LBT-ZUX9 Operating Instructions Manual page 22

Creating your own program
— Program Play
You can make a program of up to 25 steps
from all the discs in the order you want
them to be played back.
You can program all the tracks from a
disc, all the MP3 audio tracks from a
folder or a track as a step in the program
list.
You can synchro record the programmed
tracks onto a tape (page 34) or a USB
device (page 24).
1
Press CD.
2
When playback is stopped,
press PLAY MODE on the
remote repeatedly until
"PROGRAM" lights up in the
display.
3
Press one of the DISC 1 ~ 3
buttons or DISC SKIP/
EX-CHANGE (or DISC SKIP on
the remote) to select a disc.
To program all the tracks on a disc
at once:
Proceed to step 5 while "ALL" appears
in the display.
To program all the MP3 audio
tracks on a folder at once:
Press
folder you want appears in the display,
then proceed to step 5.
22 US
+/– repeatedly until the
4
Press . or > repeatedly
until the track number you want
appears in the display.
The total playing time flashes in the
display.
To program an MP3 audio track:
Press +/– repeatedly until the
folder you want appears in the display,
then press . or > repeatedly
until the track number you want
appears in the display.
Track
number
5
Press ENTER.
The track(s) is(are) programmed.
The programmed step number appears
in the display.
6
To program additional discs or
tracks.
To program
Other discs
Other tracks on
the same disc
Other tracks on
other discs
7
Press NX (or N on the
remote).
Program Play starts.
Total playing time
(including selected
track)
Repeat steps
3 and 5
4 and 5
3 to 5