Table of Contents
Advertisement
Using optional audio
components
1
Connect an optional audio
component to the PC IN L/R
jacks using an audio cord (not
supplied).
2
Turn MASTER VOLUME (or
press VOLUME – on the remote)
to turn down the volume.
3
Press to select PC function.
Press FUNCTION (RM-AMU053) or
FUNCTION +/– (RM-AMU054)
repeatedly.
4
Start playing the connected
component.
5
Turn MASTER VOLUME (or
press VOLUME +/– on the
remote) to adjust the volume.
30
GB
Adjusting the sound
To add a sound effect
To
Do this
Reinforce the
Press GROOVE
bass and create
repeatedly until
a more powerful
"GROOVE"
sound
"Z-GROOVE"
in the display.
Select the
Press SURROUND
surround effect
repeatedly until
"SURROUND" lights up
in the display.
Select a preset
Press PRESET EQ (or EQ
sound effect
on the remote) repeatedly.
To cancel, press PRESET
EQ (or EQ on the remote)
repeatedly until "FLAT"
appears.
Enhance the
Press OPTIONS and turn
sound quality of
OPERATION DIAL to
2)
the audio file
select "MP3
BOOSTER+", then press
ENTER. Turn
OPERATION DIAL to
select "AUTO", then press
ENTER.
1)
The volume switches to power mode and the
equalizer curve changes.
2)
This feature is only available during USB and
CD function.
3)
"BOOSTER" lights up in the display when
the MP3 BOOSTER+ effect is activated.
To turn on the subwoofer
(MHC-GTZ5, MHC-GTZ4 / GTZ4i,
MHC-GTZ3 / GTZ3i and LBT-GTZ4i
only)
Press SUBWOOFER repeatedly until the
SUBWOOFER indicator on the unit lights
up. If you later disconnect the subwoofer,
repeat the procedure until the
SUBWOOFER indicator on the unit lights
off. The volume of the subwoofer is
linked to the front speakers.
1)
or
1)
lights up
3)
Hide quick links:
Advertisement
Table of Contents
