Download Print this page

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
OMEN by HP Desktop PC 880
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame
Retardantsweighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
300W,500W,750W Power supply
TOP base-1 83g & Release button 27g & Hurr-side-
windows 366g & front cover 101g & front bezel 214g
& led trim 37g & hdd cover 85g
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
1
7
7
Page 1

Advertisement

loading

Summary of Contents for HP OMEN 880

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 21. Remove the Electrolytic Capacitors from PSU board PS-8501-2HB (500W)(see Figure 53-63) 22. Remove the Electrolytic Capacitors from PSU board HP P/N: 918590-003 (750W)(see Figure 64-71) 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
  • Page 3 Figure1 Press the latch button on rear side Figure2 Remove the access side cover L Figure3 Remove internal lighting module by 3 screws Figure4 Release GFX holder screws and cables PWR then remove GFX card from the chassis inside Figure5 Unplug the cables of fan and pump Figure6 Release the CPU Pump and radiator screw to remove CPU LC EL-MF877-00...
  • Page 4 Figure7 Unplug all cables connector from PCA. Figure8 Release 8 PCS screws from PCA Figure9 Remove MB cap and uninstall the MB screws to Figure10 Push the memory hook son both sides and then take off PCA from the chassis inside pick up the memory Figure11 Rotate the handle and open it up and remove Figure12 Remove the battery from the PCA...
  • Page 5 Figure13 Remove the access right side cover R by 2 PCS Figure14 Release 5pcs screws from TOP base both side screws and take off it Figure15 Unplug all cables connector from the function Figure16 Release 7pcs screws from top base module and board PCA remove function board PCBA Figure17 Open the HDD Door and push HDD locker to...
  • Page 6 Figure19 Unplug HDD cable connector from bottom HDD Figure20 Uninstall HDD cage screws and remove high and pull up HDD cage module to remove HDD end HDD SATA cable from high end HDD back plate Figure21 Unplug all cable connector from TOP HDD and Figure22 Disconnect ODD cable connector from ODD pull up HDD cage to remove HDD device...
  • Page 7 Figure25 Remove the KEYMOD screw and take off Figure26 Remove the hand down cover screws and take Figure27 Remove the top bas cover from chassis top Figure28 Remove the top fillet r from the top base cover side from chassis top side Figure29 Remove the power switch cable from top base Figure30 Remove the front bezel hook and bezel uninstall module...
  • Page 8 Figure31 Uninstall the front bezel hook and remove bezel Figure32 Remove the front cover voodoo lighting from part from chassis bezel cover by 4 PCS screws to uninstall Figure33 Remove the trim lighting module from the bezel Figure34 Remove the plastic foots from chassis bottom cover Figure35 Remove the gasket from the chassis rear inside Figure36 Remove the plastic lock screw and remove it...
  • Page 9 Figure37 Remove the top antenna screws and remove Figure38 Release 4 screws from front fan and remove it antenna cables Figure39 Release 4 screws from Power supply and Figure40 Remove plastic side windows from side cover L remove it hook feature Figure41 Remove LC cooler fan guard by 4pcs Figure42 Remove the screws between Fan and radiator then remove GFX LC FAN from LC cooler module...
  • Page 10 300W Power supply tear down Figure44 Remove the screw for top Figure43 Cut the cable tie. Figure45 Remove the FAN and inlet screws Figure46 Remove the FG screw Figure47 Disconnect the fan connector Figure48 Remove the LED holder EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 11 Figure49 Remove the PCB screws Figure50 Cut output cable, AC inlet wire, LED wire. Figure51 Remove the capacitors use solder iron. Figure52 Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it.( C105) 500W Power supply tear down Figure54 Remove the screws for top Figure53 Cut the cable tie.
  • Page 12 Figure55 Remove the FAN and inlet screws Figure56 Remove the FG screw Figure57 Cut the cable tie Figure58 Disconnect the fan connector Figure59 Remove LED holder Figure60 Remove the PCB screws EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 13 Figure61 Cut output cable, AC inlet wire, LED wire Figure62 Remove the capacitors use solder iron Figure63 Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it.( C504,C112 ) 750W Power supply tear down Figure65 Remove the PSU side screws Figure64 Remove the top screws EL-MF877-00...
  • Page 14 Figure66 Disconnect the fan connector Figure67 Remove the back side screws Figure68 Remove the AC inlet screws Figure69 Remove the ground wire screw Figure70 Remove the PCB screws Figure71 Remove the Electrolytic Capacitors greater than 2.5cm in diameter or height (C801,C951,C252,C166) EL-MF877-00 Page 14...