Advertisement
Figure 45 De-screw from the PSU's left side, use tool #1
Figure 47 De-screw the PCBA from its 4 corners, use tool
#1, then pull-up the connector of AC & Fan wire
Figure 49 Cut-off the biggest electrolyte-capacitor from
PCBA location C1 for treatment, use tool #2
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
Figure 46 Remove the case top
Figure 48 Remove the PCBA
Figure 50 Select the large printed circuit board for treatment
EL-MF877-01
Page 14
Advertisement
