Using The Kodak Pps600 - Kodak PPS600 User Manual

8. USING THE KODAK PPS600

Check the remaining battery capacity
press the power button once to display the remaining battery capacity. to ensure you never run out of
power, please recharge kodak ppS600 before use or storage. it is highly recommend to recharge
kodak ppS600 at least once every 3 months.
USING
1. press the power button located next to each port you will be using.
2. you'll know the port is turned on when the red light next to the port(s) is illuminated.
Note: when a port/ports is/are not in use, turn it/them off to save power.
3. plug in your device for mobile power.
Intelligent cooling
the kodak ppS600 intelligent controll system will adjust the pV input or ac output power based on the
outer case temperature of the outer case in order to ensure that the outer case can be handled safely.
Appropriate temperature usage
• Charge protection: kodak ppS600 can charge your device when the ambient temperature is bet-
ween 0 - 40°c. outside this temperature range, the system automatically stops charging but will restart
once the temperature is back inside the acceptable range.
• low ambient temperatures can affect both the battery capacity and power output of the kodak
ppS600.
Best-use strategy
• if you plug in devices that have a high power requirement, the charge level of kodak ppS600 can drop
quickly and you will not be able to extract the entire 578wh of energy.
• on the other hand, if you're charging devices that draw power more slowly (e.g., a tablet), you will be
able to extract close to the full 578wh from kodak ppS600.
make sure that the electronic device you are powering works properly prior to use.
the max. ac power consumption for electronic devices is 300w.
due to the different types of electric devices, it is possible that they may not operate
it is also possible that the electronic device may receive a lower maximum input power.
if the unit is connected to a radio, video player, tV screen, etc., there may be some electromagnetic
interference. Stop using the device immediately if the current flow is interrupted repeatedly.
ATTENTION
DO NOT use KODAK PPS600 when any fan is broken.
ATTENTION
even if their power consumption is less than 300w.
compared to an ac power source in a house,
13