Table of Contents
Advertisement
Indicator lamp
turns off after
3 sec.
Indicator lamp
flashes two times
then turns off.
Indicator lamp
flashes three times
then turns off.
Indicator lamp
continually flashes.
Indicator lamp
turns off.
Indicator lamp
stays on.
Lamp is working under "connect directly to the
light" mode. (When power is turned on, the
indicatior light will be off a few seconds, which
means WiFi is working under the "connnect to
light" mode
WiFi is working under the "network" mode and
is waiting for configuration status. If the light is
in network mode, but is not connected to the
router, then you will need to use manual setting
to connect light to router.
WiFi is working under the "network" mode and
and error has occurred while connecting to the
router. This could be a password error, or the
router is turned off.
Light is transmitting data.
Light is not transmitting data.
Light and Wifi Network are working properly.
28
Advertisement
Table of Contents
Need help?
Do you have a question about the C-Ray 200 and is the answer not in the manual?
Questions and answers