Cobalt Aquatics C-Ray 200 User Manual page 11

Installing the Mounting Bracket
Securely fasten the upright to the aquarium attachment bracket.
1.
(Figure 1)
2.
Attach the mounting bracket to the upright. (Figure 2)
3.
Put the aquarium attachment bracket over the tank rim and secure
with the included screws. (Figure 3)
4.
Slide the attachment bar into the mounting guide (Figure 4) and
secure using the included screws. (Figure 4)
5.
Fit the attachment bar into the mounting bracket and secure with the
included screws. (Figure 5)
6.
Using the included wire clamp, secure the electrical wire to the
mounting bracket. (Figure 6)
7. Once the light is securely mounted and all desired adjustments are
made, connect the light to the power adapter and plug into a power
source. Make sure to make a drip loop before the plug in the wall.
(Figure 6)
10