Vizio SB2920-D6E Quick Start Manual page 12

Function LED Behavior
TruSurround On
DTS
TruSurround
On/Off
TruSurround Off
Treble
Two center LEDs indicate
Treble level 0.
Levels
Bass
Two center LEDs indicate
Levels
Bass level 0.
Movie Mode
EQ
Mode
Music Mode
ENG - 12
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
all inputs will produce virtual surround sound. When disabled (Off), all sources will
playback in stereo.
Press the TREBLE button then press the Next/Previous button to increase/decrease
the treble level. The LED indicators will move up with increasing levels and down with
decreasing levels.
Press the BASS button then press the Next/Previous button to increase/decrease
the bass level. The LED indicators will move up with increasing levels and down with
decreasing levels. If Bass is set to minimum, the external sub level will be set to off.
Press the EQ button to enable Movie or Music mode. When the four center LEDs are
lit, the preset audio settings for watching movies are enabled. When the four center
LEDs are not lit, the preset audio settings for listening to music are enabled.
Note: Movie mode is on by default.
Description