Troubleshooting - Chefman Choice Cut Electric RJ46 User Manual

TROUBLESHOOTING

Problem
The Meat Grinder is not turning on.
The Chute is jammed.
Kibbeh is not forming properly.
My sausages have air bubbles.
The meat is not coming out in a
consistent texture.
9
Cause
1. There could be possible damage
to the Power Cord, or the outlet is
not working.
2. Back switch or Side switch is
not on.
1. Warm fat can sometimes cause
the Chute to jam.
2. Pieces that are loosely assembled
onto the Meat Grinder will cause
meat to get caught and clog the
grinder.
A not-quite-ground piece of meat
is stuck, causing ground kibbeh
meat to emerge only partially.
Kibbeh mixture may also not be
chilled enough or mixed with
enough bulgur.
Sausage casings were not pricked
to create small holes before
stuffing.
The Blade could be assembled
backwards.
Solution
1. Check to see if there is any visible
damage to the Power Cord. If
there is, do not operate the Meat
Grinder. Instead, contact Chefman
Customer Service at 888-315-
6553 or email customerservice@
chefman.com.
2. Check that the Back and Side
switches are turned on.
1. Use the Reverse function on the
switch to release anything that may
be jamming the Chute. Refer to
step 16 in Operating instructions on
page 6 for directions.
2. Fully turn off and unplug the
grinder. Check that all parts are
tightly assembled.
Turn off and unplug the Meat
Grinder and check the Chute for
stuck pieces.
Use the tip of your knife to carefully
create tiny holes in casings; these
holes will allow air to escape as the
casings are filled.
Turn off and unplug Meat Grinder.
Disassemble and turn Blade
around. The curved, smooth side
should face away from you towards
the Auger.
RJ46