Hardi EZ-Guide Plus Getting Started Manual page 10

EZ-Guide® Plus
Setting the units and language
To change:
• the units to metric, use Lightbar / Units
• the language to Portuguese, Spanish, French, German, or Italian, use Lightbar / Language
Changing the display orientation
By default, the lightbar displays correctly when it is mounted with
the LEDs above the screen (upright).
To configure the lightbar to display correctly when it is mounted
with the LEDs below the screen (inverted), use Lightbar / Lightbar
Mount.
Configuring the display
Use Lightbar / Display Config to enable or disable any of the follo-
wing items displayed on the plan and perspective maps:
• Progress Lines: To give a sense of perspective and speed
• Adjacent Swaths: One swath either side of the current swath
• Field Boundary: If the field is a Headland
• AB Line
• Path Driven
You can also use this screen to change the View option:
• Auto: View automatically changes between plan and perspective
views in headlands
• Fixed: View remains fixed
Path display
By default, the path you have driven is always displayed on screen as
a dotted line. If you have a spray switch connected, you can choose
to display the path only when the spray switch is on. To do this, con-
figure Path Display to Switch.
To turn off the display of the driven path, configure Path Display to
Off.
10